9VAC5-45 Consumer and Commercial Products

REGULATIONS

Vol. 25 Iss. 20 - June 08, 2009

TITLE 9. ENVIRONMENT

STATE AIR POLLUTION CONTROL BOARD

Chapter 45

Proposed Regulation

REGISTRAR'S NOTICE: Due to the length, the following regulations filed by the State Air Pollution Control Board are not being published. However, in accordance with § 2.2-4031 of the Code of Virginia, the summary is being published in lieu of the full text. The full text of the regulations are available for public inspection at the office of the Registrar of Regulations and at the State Air Pollution Control Board (see contact information below) and are accessible on the Virginia Register of Regulations website at http://register.dls.virginia.gov/vol25/Welcome.htm.

Titles of Regulations: 9VAC5-20. General Provisions (amending 9VAC5-20-21).

9VAC5-45. Consumer and Commercial Products (adding 9VAC5-45-10 through 9VAC5-45-850).

Statutory Authority: § 10.1-1308 of the Code of Virginia.

Public Hearing Information:

July 22, 2009 - 10 a.m. - Department of Environmental Quality, Northern Regional Office, Conference Room 1, 13901 Crown Court, Woodbridge, VA

Public Comments: Public comments may be submitted until 5 p.m. on August 10, 2009.

Agency Contact: Gary E. Graham, Department of Environmental Quality, 629 East Main Street, P.O. Box 1105, Richmond, VA 23218, telephone [phone], FAX [phone], or email [e-mail].

Basis: Section 10.1-1308 of the Code of Virginia authorizes the State Air Pollution Control Board to promulgate regulations abating, controlling, and prohibiting air pollution in order to protect public health and welfare.

Purpose: The purpose of these regulations is to require owners to limit emissions of air pollution from portable fuel containers, certain consumer products, architectural and industrial maintenance coatings, and paving operations to the level necessary for (i) the protection of public health and welfare, and (ii) the attainment and maintenance of the air quality standards. The proposed amendments are being made to adopt new and revised standards for the control of VOC emissions from adhesive and sealants, portable fuel containers, and certain consumer products within the Northern Virginia and Fredericksburg VOC Emissions Control Areas. This action is being taken to allow Virginia to meet its obligation to implement control measures in areas designated as nonattainment under the eight-hour ozone standard and to implement contingency measures within former nonattainment areas that have been redesignated as ozone maintenance areas.

Substance: The proposed regulatory action adds a new chapter (9VAC5-45) specifically for regulations pertaining to consumer and commercial products and is applicable to specific product types and the owners that are involved in the manufacture, distribution, retail sales, and in some cases, the marketing and use of those products. In Part I of the new chapter, special provisions specify the general testing, monitoring, compliance, notification, recordkeeping, and reporting requirements that are applicable to all articles in the new chapter and specify certain other sections of the regulations that are not generally applicable. Exceptions to the special provisions are addressed in each individual article of the new chapter.

In Part II of Chapter 45:

1. The proposed regulatory action establishes standards for portable fuel containers for products manufactured before and after January 1, 2009, as new Articles 1 and 2 in Chapter 45, respectively, and applies to all of the products subject to the current provisions of Chapter 40, Article 42, Portable Fuel Container Spillage. Article 1 clarifies some Article 42 exemptions and definitions, adds another exemption category, removes obsolete standards and their associated administrative requirements, and provides criteria for sell-through of products. Because Article 1 applies to all products manufactured before January 1, 2009, and is designed to replace Chapter 40, Article 42, the compliance schedule proposed for Article 1 is the same as that in Chapter 40, Article 42. Article 2 applies to all portable fuel container products manufactured on or after January 1, 2009, and requires board precertification of new portable fuel container products as compliant with new labeling requirements and with new and more stringent design and performance standards. Article 2 also includes applicability to a new category of owner, and adds (i) new and revised exemptions, (ii) new certification procedures, (iii) new testing standards, and (iv) alternative compliance provisions for innovative products over those provisions now applicable under Chapter 40, Article 42. The new Article 2 specifies a compliance deadline no later than January 1, 2009. Chapter 40, Article 42 will be repealed at an appropriate time after the standards in the new Articles 1 and 2 are effective.

2. The proposed regulatory action establishes standards Consumer Products for products manufactured before and after January 1, 2009, as a new Articles 3 and 4 in Chapter 45, respectively and applies to all of the products subject to the current provisions of Chapter 40, Article 50 Consumer Products. Article 3 pertains to consumer products manufactured before January 1, 2009, clarifies some definitions and standards, makes the Alternative Control Plan procedures more flexible, revises labeling, reporting and other administrative requirements, and clarifies sell-through criteria. Because Article 3 applies to all products manufactured before January 1, 2009, and is designed to replace Chapter 40, Article 50, the compliance schedule proposed for Article 3 is the same as Chapter 40, Article 50. Article 4 applies to all consumer products manufactured after January 1, 2009, and includes all of the changes made in Article 3, adds more definitions and standards for some new product categories and establishes new labeling and other administrative requirements. Article 4 specifies a compliance deadline no later than January 1, 2009. Chapter 40, Article 50 will be repealed at an appropriate time after the standards in the new Articles 3 and 4 are effective.

3. The proposed regulatory action establishes standards for Architectural and Industrial Maintenance Coatings and incorporates all of the provisions of Chapter 40, Article 49 Emission Standards for Architectural and Industrial Maintenance Coatings into a new Article 5 in Chapter 45, except that the new Article 5 removes some obsolete reporting requirements and changes the remaining one to a recordkeeping requirement. Because the standards and other provisions of the new Article 5 are not substantively changed from what is in Chapter 40, Article 49, no new compliance dates are proposed. Chapter 40, Article 49 will be repealed at an appropriate time after the new Article 5 standards are effective.

4. The proposed regulatory action will add a new regulation, Article 6 in the new chapter 45 that establishes new emission standards for Adhesives and Sealants. The provisions of this article apply to owners who sell, supply, offer for sale or manufacture for sale commercial adhesives, sealants, adhesive primers, or sealant primers that contain volatile organic compounds within the Northern Virginia and Fredericksburg VOC Emissions Control Areas. The provisions will also apply to owners that use, apply for compensation, or solicit the use or application of such products in those areas. Exempted from the regulation is any such product manufactured in the Northern Virginia or Fredericksburg VOC Emissions Control Areas for shipment and use outside of these areas. The provisions of this regulation will not apply to a manufacturer or distributor who sells, supplies, or offers for sale such products that do not comply with the VOC standards as long as the manufacturer or distributor can demonstrate both that the product is intended for shipment and use outside of those areas and that the manufacturer or distributor has taken reasonable prudent precautions to assure that the product is not distributed in those areas. A number of product-specific exemptions are also allowed. VOC content limits are specified for different product categories. Control technology guidelines are offered as an alternate means of achieving compliance with the standards. Test methods, registration requirements, and recordkeeping procedures are provided. This article specifies a compliance deadline of January 1, 2009.

5. The proposed regulatory action establishes standards for asphalt paving operations and incorporates all of the provisions of Chapter 40, Article 39 Emission Standards for Asphalt Paving Operations as a new Article 7 in Chapter 45. Applicability provisions in Article 7 apply to owners instead of sources and a new definition of paving operations is added that clarifies the types of operations to which the provisions of the regulation apply. Since the standards and other provisions in this article are not substantively changed, no new compliance date is proposed. Chapter 40, Article 39 will be repealed at an appropriate time after the new Article 7 standards are effective.

Issues: 1. Public: The primary advantage to the public is that the adoption of these regulations will significantly decrease emissions of VOCs in the Northern Virginia and Fredericksburg areas, thus benefiting public health and welfare. There are no disadvantages to the public.

2. Regulated Community: The primary advantage to the regulated community is that the new regulations are clearer and have fewer reporting requirements than some of the regulations they replace. The primary disadvantages are that there may be fewer days that certain products may be applied, and there may be a need for worker training for some users to learn how to apply some of the compliant products correctly.

3. Department: The primary advantages to the department are that the adoption of these regulations will allow Virginia (i) to attain and maintain air quality standards and improve public health of Virginians, and (ii) to uphold its promise to its jurisdictional neighbors (Maryland and Washington, D.C.) to all take similar regulatory action in order to minimize regulatory differences across the affected borders. The primary disadvantage to the department is increased compliance cost to administer the new regulations.

Localities Particularly Affected: The localities particularly affected by the proposed regulations are the counties of Arlington, Fairfax, Loudoun, Prince William, Stafford, and Spotsylvania; and the cities of Alexandria, Fairfax, Falls Church, Manassas, Manassas Park, and Fredericksburg.

The Department of Planning and Budget's Economic Impact Analysis:

Summary of the Proposed Amendments to Regulation. In order to comply with Environmental Protection Agency (EPA) and statutory mandates, the Virginia Air Pollution Control Board (board) proposes several regulatory changes including: 1) amending the portable fuel container spillage and consumer products provisions to conform to the strategies recommended by the OTC, 2) prohibiting owners from manufacturing, distributing, selling, and using noncompliant consumer and commercial adhesive and sealant products and architectural and industrial maintenance coating products, and 3) prohibiting the mixing, storage, and application of noncompliant emulsified asphalt coating products, with an exception for coating residential driveways.

Result of Analysis. The benefits likely exceed the costs for one or more proposed changes. There is insufficient data to accurately compare the magnitude of the benefits versus the costs for other changes.

Estimated Economic Impact. In 2004, the Environmental Protection Agency (EPA) promulgated the Phase 1 Ozone Implementation Regulation to provide a process for classifying volatile organic compound (VOC) Emissions Control Areas, based on the severity of their ozone problems, and establishing deadlines for state and local governments to reduce ozone levels. The phase 1 regulation established a process for transitioning from implementation of the 1-hour ozone air quality standard to the more protective 8-hour ozone air quality standard.

The Phase 2 Ozone Implementation Regulation was promulgated by the EPA in 2005 to provide the remaining elements of the process to implement the 8-hour ozone air quality standard. The phase 2 EPA regulation outlines emissions control and planning requirements for states to address as they develop their state implementation plans (SIPs) demonstrating how they will reduce ozone pollution to meet the 8-hour ozone standard. Additionally, the regulation requires states to demonstrate that non-attainment areas will attain the 8-hour ozone standard as expeditiously as practicable.

Four areas of Virginia are designated as non-attainment areas under the 8-hr ozone standard: Northern Virginia, Hampton Roads, Richmond, and Western Virginia. These areas have been classified as VOC emissions control areas and must implement the control and contingency measures necessary to attain the 8-hour ozone standard. Fredericksburg has been designated as an attainment area. Accordingly, it is considered to be a “maintenance area” and thus, must maintain original controls as well as implement additional ones as needed to maintain the 8-hour ozone standard.

The federal Ozone Transport Commission (OTC) has identified what are considered the least cost methods of ozone control that will enable states to attain the 8-hour ozone standard within Ozone Transport Regions (OTR). The board proposed consumer and commercial product requirements for these regulations are consistent with these least cost methods recommended by the OTC in order for the Commonwealth to meet the EPA mandated 8-hour ozone standard.

As mentioned above, the board proposed requirements include: 1) amending the portable fuel container spillage and consumer products provisions to conform to the strategies recommended by the OTC, 2) prohibiting owners from manufacturing, distributing, selling, and using noncompliant consumer and commercial adhesive and sealant products and architectural and industrial maintenance coating products, and 3) prohibiting the mixing, storage, and application of noncompliant emulsified asphalt coating products, with an exception for coating residential driveways.

Altogether, the proposed amendments would enable the Department of Environmental Quality (DEQ) to implement control and contingency measures in the Northern Virginia VOC Emissions Control Area to demonstrate that the Northern Virginia non-attainment area will meet its goal of attainment by June 15, 2010. The new and revised regulations would also be implemented in the Fredericksburg Maintenance Area in order to provide the most cost-effective additional VOC contingency measures for the Fredericksburg Maintenance Area.

The following costs and savings are projected for all regulated entities in the Northern Virginia and Fredericksburg VOC Emissions Control Areas for implementation and compliance and include projected reporting, recordkeeping and other administrative costs: 1) Portable Fuel Containers: insignificant cost to Virginia small businesses or individuals, 2) Consumer Products: up to, but likely somewhat less than $6,500,000 cost per year for manufacturers, distributors and retailers of consumer products in the region combined, 3) Architectural and Industrial Coatings: $3,200 savings annually per reporting facility, 4) Adhesives and Sealants: $1,200,000 per year cost shared between manufacturers, distributors, and contractors, 5) Asphalt Paving: no significant net cost or savings.

The adoption of this regulation will decrease emissions of VOC in the Northern Virginia and Fredericksburg areas by an estimated total of 8.3 tons per day or more.¹ This significant emissions reduction will benefit public health and welfare by reducing ozone. Ozone injures vegetation, has adverse effects on materials (rubber and fabrics), and is a pulmonary irritant that affects respiratory mucous membranes, lung tissues, and respiratory functions. Reducing ozone will thus likely result in healthier citizens and reduce property damage. It will also allow Virginia to avoid federal sanctions that would be imposed for violating the SIP provisions of the Clean Air Act and to uphold its promise to its jurisdictional neighbors (Maryland and Washington, D.C.) to take this action.

Businesses and Entities Affected. The proposed amendments potentially affect 476 manufacturers, distributors and retailers of consumer products, one manufacturer of architectural and industrial coatings, approximately 2500 firms who either produce or use or apply adhesives and sealants, and 78 asphalt paving contractors, most of whom qualify as small businesses.²

Localities Particularly Affected. The proposed regulations particularly affect the counties of Arlington, Fairfax, Loudoun, Prince William, Stafford and Spotsylvania and the cities of Alexandria, Fairfax, Falls Church, Manassas, Manassas Park and Fredericksburg.

Projected Impact on Employment. The increased costs for manufacturers, distributors and retailers of consumer products and manufacturers of adhesives and sealants and contractors who use adhesives and sealants will likely reduce profitability for some products. This will consequently have a likely moderate negative impact on employment.

Effects on the Use and Value of Private Property. Manufacturing that produces VOC will be altered in ways that will reduce VOC emission. This will increase costs and consequently moderately reduce the value of some firms.

Small Businesses: Costs and Other Effects. The proposed amendments will increase costs for some small businesses such as manufacturers, distributors and retailers of consumer products and manufacturers of adhesives and sealants and contractors who use adhesives and sealants.

Small Businesses: Alternative Method that Minimizes Adverse Impact. Though the board’s proposals add costs for some small businesses, there is not a clear alternative that reduces the adverse impact and still enables the Commonwealth to meet EPA requirements.

Real Estate Development Costs. The proposed amendments may moderately, but probably not significantly, add to real estate development costs via increased costs associated with adhesives, sealants, and consumer products.

Legal Mandate. The Department of Planning and Budget (DPB) has analyzed the economic impact of this proposed regulation in accordance with § 2.2-4007.04 of the Administrative Process Act and Executive Order Number 36 (06). Section 2.2-4007.04 requires that such economic impact analyses include, but need not be limited to, the projected number of businesses or other entities to whom the regulation would apply, the identity of any localities and types of businesses or other entities particularly affected, the projected number of persons and employment positions to be affected, the projected costs to affected businesses or entities to implement or comply with the regulation, and the impact on the use and value of private property. Further, if the proposed regulation has adverse effect on small businesses, § 2.2-4007.04 requires that such economic impact analyses include (i) an identification and estimate of the number of small businesses subject to the regulation; (ii) the projected reporting, recordkeeping, and other administrative costs required for small businesses to comply with the regulation, including the type of professional skills necessary for preparing required reports and other documents; (iii) a statement of the probable effect of the regulation on affected small businesses; and (iv) a description of any less intrusive or less costly alternative methods of achieving the purpose of the regulation. The analysis presented above represents DPB’s best estimate of these economic impacts.

_____________________________

¹ Data source: Department of Environmental Quality

² Data source: via Department of Environmental Quality, the Virginia Employment Commission database on April 21, 2008.

Agency's Response to the Department of Planning and Budget's Economic Impact Analysis: The department has reviewed the economic impact analysis prepared by the Department of Planning and Budget and has no comment.

Summary:

A new chapter (9VAC5-45) is established for the control of volatile organic compound (VOC) emissions from various consumer and commercial products in the Northern Virginia and Fredericksburg VOC Emissions Control Areas. The new chapter consists of two parts. The first part of the new chapter contains general requirements pertaining to all of the types of consumer and commercial products regulated. The second part is composed of articles that contain VOC content and emission standards for individual types of consumer products and contain the control technology, testing, monitoring, administrative, recordkeeping, and reporting requirements necessary to determine compliance with each of the applicable standards.

The new chapter includes two articles that control VOC emissions from portable fuel containers and spouts. These articles implement design, performance, and labeling standards for portable fuel container products before and after January 1, 2009, and prohibit owners from manufacturing, distributing, and selling noncompliant products.

The new chapter includes two articles that control VOC emissions from certain types of consumer products. These articles implement VOC content standards for some individual product categories before and after January 1, 2009, and prohibit owners from manufacturing, distributing, advertising, or selling noncompliant products.

The new chapter includes an article for the control of VOC emissions from architectural and industrial maintenance coatings that implements VOC content standards for all such coating products and prohibits owners from manufacturing, distributing, selling, and using noncompliant products.

The new chapter includes an article that controls VOC emissions from adhesives, adhesive primers, sealants, and sealant primers that implements VOC content limits for those products and prohibits owners from manufacturing, distributing, selling, or applying noncompliant products.

Finally, the new chapter includes an article that controls VOC emissions from asphalt paving operations, which prescribes the use of emulsified asphalt coatings except for the purpose of coating residential driveways and prohibits the mixing, storage, and application of noncompliant products.

VA.R. Doc. No. R07-264; Filed May 18, 2009, 11:59 a.m.