-
REGULATIONS
Vol. 27 Iss. 3 - October 11, 2010TITLE 9. ENVIRONMENTSTATE AIR POLLUTION CONTROL BOARDChapter 20Final RegulationREGISTRAR'S NOTICE: The State Air Pollution Control Board is claiming an exclusion from the Administrative Process Act in accordance with § 2.2-4006 A 4 a of the Code of Virginia, which excludes regulations that are necessary to conform to changes in Virginia statutory law where no agency discretion is involved. The State Air Pollution Control Board will receive, consider, and respond to petitions by any interested person at any time with respect to reconsideration or revision.
Title of Regulation: 9VAC5-20. General Provisions (Rev. D10) (amending 9VAC5-20-21).
Statutory Authority: § 10.1-1308 of the Code of Virginia; §§ 110 and 182 of the Clean Air Act; 40 CFR Part 51.
Effective Date: November 10, 2010.
Agency Contact: Karen G. Sabasteanski, Policy Analyst, Department of Environmental Quality, P.O. Box 10009, Richmond, VA 23240, telephone (804) 698-4426, FAX (804) 698-4510, TTY (804) 698-4021, or email karen.sabasteanski@deq.virginia.gov.
Summary:
Section 10.1-1307.03 of the Code of Virginia requires that the board, by January 1, 2011, adopt any regulations necessary to implement and enforce the requirements of § 328 of the federal Clean Air Act relating to requirements to control air pollution from Outer Continental Shelf (OCS) sources located offshore of the Commonwealth. The regulations may not differ materially from the regulations promulgated by the U.S. Environmental Protection Agency (EPA) in implementing § 328 of the Clean Air Act (40 CFR Part 55). Therefore, 9VAC5-20-21 is amended such that the federal OCS program of 40 CFR Part 55 is adopted. This amendment will enable EPA to delegate implementation and enforcement of 40 CFR Part 55 to the Commonwealth, and, in turn, enable the Commonwealth to require limitations on emissions as needed in order to attain and maintain the ambient air quality standards, and to meet prevention of significant deterioration (PSD) requirements.
9VAC5-20-21. Documents incorporated by reference.
A. The Administrative Process Act and Virginia Register Act provide that state regulations may incorporate documents by reference. Throughout these regulations, documents of the types specified below have been incorporated by reference.
1. United States Code.
2. Code of Virginia.
3. Code of Federal Regulations.
4. Federal Register.
5. Technical and scientific reference documents.
Additional information on key federal regulations and nonstatutory documents incorporated by reference and their availability may be found in subsection E of this section.
B. Any reference in these regulations to any provision of the Code of Federal Regulations (CFR) shall be considered as the adoption by reference of that provision. The specific version of the provision adopted by reference shall be that contained in the CFR
(2008)(2010) in effect July 1,20082010. In making reference to the Code of Federal Regulations, 40 CFR Part 35 means Part 35 of Title 40 of the Code of Federal Regulations; 40 CFR 35.20 means § 35.20 in Part 35 of Title 40 of the Code of Federal Regulations.C. Failure to include in this section any document referenced in the regulations shall not invalidate the applicability of the referenced document.
D. Copies of materials incorporated by reference in this section may be examined by the public at the central office of the Department of Environmental Quality, Eighth Floor, 629 East Main Street, Richmond, Virginia, between 8:30 a.m. and 4:30 p.m. of each business day.
E. Information on federal regulations and nonstatutory documents incorporated by reference and their availability may be found below in this subsection.
1. Code of Federal Regulations.
a. The provisions specified below from the Code of Federal Regulations (CFR) are incorporated herein by reference.
(1) 40 CFR Part 50-National Primary and Secondary Ambient Air Quality Standards.
(a) Appendix A -- Reference Method for the Determination of Sulfur Dioxide in the Atmosphere (Pararosaniline Method).
(b) Appendix B -- Reference Method for the Determination of Suspended Particulate Matter in the Atmosphere (High-Volume Method).
(c) Appendix C -- Measurement Principle and Calibration Procedure for the Continuous Measurement of Carbon Monoxide in the Atmosphere (Non-Dispersive Infrared Photometry).
(d) Appendix D -- Measurement Principle and Calibration Procedure for the Measurement of Ozone in the Atmosphere.
(e) Appendix E -- Reserved.
(f) Appendix F -- Measurement Principle and Calibration Procedure for the Measurement of Nitrogen Dioxide in the Atmosphere (Gas Phase Chemiluminescence).
(g) Appendix G -- Reference Method for the Determination of Lead in Suspended Particulate Matter Collected from Ambient Air.
(h) Appendix H -- Interpretation of the National Ambient Air Quality Standards for Ozone.
(i) Appendix I -- Interpretation of the 8-Hour Primary and Secondary National Ambient Air Quality Standards for Ozone.
(j) Appendix J -- Reference Method for the Determination of Particulate Matter as PM10 in the Atmosphere.
(k) Appendix K -- Interpretation of the National Ambient Air Quality Standards for Particulate Matter.
(l) Appendix L - Reference Method for the Determination of Fine Particulate Matter as PM2.5 in the Atmosphere.
(m) Appendix M - Reserved.
(n) Appendix N - Interpretation of the National Ambient Air Quality Standards for PM2.5.
(o) Appendix O - Reference Method for the Determination of Coarse Particulate Matter as PM in the Atmosphere.
(p) Appendix P - Interpretation of the Primary and Secondary National Ambient Air Quality Standards for Ozone.
(q) Appendix Q - Reference Method for the Determination of Lead in Suspended Particulate Matter as PM10 Collected from Ambient Air.
(r) Appendix R - Interpretation of the National Ambient Air Quality Standards for Lead.
(s) Appendix S - Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Nitrogen (Nitrogen Dioxide).
(2) 40 CFR Part 51 -- Requirements for Preparation, Adoption, and Submittal of Implementation Plans.
(a) Appendix M -- Recommended Test Methods for State Implementation Plans.
(b) Appendix S -- Emission Offset Interpretive Ruling.
(c) Appendix W -- Guideline on Air Quality Models (Revised).
(d) Appendix Y - Guidelines for BART Determinations Under the Regional Haze Rule.
(3) 40 CFR Part 55 -- Outer Continental Shelf Air Regulations.
(3)(4) 40 CFR Part 58 -- Ambient Air Quality Surveillance.Appendix A - Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring.
(5) 40 CFR Part 59 -- National Volatile Organic Compound Emission Standards for Consumer and Commercial Products.
(a) Subpart C - National Volatile Organic Compound Emission Standards for Consumer Products.
(b) Subpart D - National Volatile Organic Compound Emission Standards for Architectural Coatings, Appendix A -- Determination of Volatile Matter Content of Methacrylate Multicomponent Coatings Used as Traffic Marking Coatings.
(4)(6) 40 CFR Part 60 -- Standards of Performance for New Stationary Sources.The specific provisions of 40 CFR Part 60 incorporated by reference are found in Article 5 (9VAC5-50-400 et seq.) of Part II of 9VAC5-50 (New and Modified Sources).
(5)(7) 40 CFR Part 61 -- National Emission Standards for Hazardous Air Pollutants.The specific provisions of 40 CFR Part 61 incorporated by reference are found in Article 1 (9VAC5-60-60 et seq.) of Part II of 9VAC5-60 (Hazardous Air Pollutant Sources).
(6)(8) 40 CFR Part 63 -- National Emission Standards for Hazardous Air Pollutants for Source Categories.The specific provisions of 40 CFR Part 63 incorporated by reference are found in Article 2 (9VAC5-60-90 et seq.) of Part II of 9VAC5-60 (Hazardous Air Pollutant Sources).
(7) 40 CFR Part 59, Subpart D-National Volatile Organic Compound Emission Standards for Architectural Coatings, Appendix A -- "Determination of Volatile Matter Content of Methacrylate Multicomponent Coatings Used as Traffic Marking Coatings."(8)(9) 40 CFR Part 64, Compliance Assurance Monitoring.(9)(10) 40 CFR Part 72, Permits Regulation.(10)(11) 40 CFR Part 73, Sulfur Dioxide Allowance System.(11)(12) 40 CFR Part 74, Sulfur Dioxide Opt-Ins.(12)(13) 40 CFR Part 75, Continuous Emission Monitoring.(13)(14) 40 CFR Part 76, Acid Rain Nitrogen Oxides Emission Reduction Program.(14)(15) 40 CFR Part 77, Excess Emissions.(15)(16) 40 CFR Part 78, Appeal Procedures for Acid Rain Program.(16) 40 CFR Part 59 Subpart C, National Volatile Organic Compound Emission Standards for Consumer Products.(17) 40 CFR Part 152 Subpart I, Classification of Pesticides.
(18) 49 CFR Part 172, Hazardous Materials Table. Special Provisions, Hazardous Materials Communications, Emergency Response Information, and Training Requirements, Subpart E, Labeling.
(19) 29 CFR Part 1926 Subpart F, Fire Protection and Prevention.
b. Copies may be obtained from: Superintendent of Documents, P.O. Box 371954, Pittsburgh, Pennsylvania 15250-7954; phone (202) 783-3238.
2. U.S. Environmental Protection Agency.
a. The following documents from the U.S. Environmental Protection Agency are incorporated herein by reference:
(1) Reich Test, Atmospheric Emissions from Sulfuric Acid Manufacturing Processes, Public Health Service Publication No. PB82250721, 1980.
(2) Compilation of Air Pollutant Emission Factors (AP-42). Volume I: Stationary and Area Sources, stock number 055-000-00500-1, 1995; Supplement A, stock number 055-000-00551-6, 1996; Supplement B, stock number 055-000-00565, 1997; Supplement C, stock number 055-000-00587-7, 1997; Supplement D, 1998; Supplement E, 1999.
(3) "Guidelines for Determining Capture Efficiency " (GD-35), Emissions Monitoring and Analysis Division, Office of Air Quality Planning and Standards, January 9, 1995.
b. Copies of the document identified in subdivision E 2 a (1) of this subdivision, and Volume I and Supplements A through C of the document identified in subdivision E 2 a (2) of this subdivision, may be obtained from: U.S. Department of Commerce, National Technical Information Service, 5285 Port Royal Road, Springfield, Virginia 22161; phone 1-800-553-6847. Copies of Supplements D and E of the document identified in subdivision E 2 a (2) of this subdivision may be obtained online from EPA's Technology Transfer Network at http://www.epa.gov/ttn/index.html. Copies of the document identified in subdivision E 2 a (3) of this subdivision are only available online from EPA's Technology Transfer Network at http://www.epa.gov/ttn/emc/guidlnd.html.
3. U.S. government.
a. The following document from the U.S. government is incorporated herein by reference: Standard Industrial Classification Manual, 1987 (U.S. Government Printing Office stock number 041-001-00-314-2).
b. Copies may be obtained from: Superintendent of Documents, P.O. Box 371954, Pittsburgh, Pennsylvania 15250-7954; phone (202) 512-1800.
4. American Society for Testing and Materials (ASTM).
a. The documents specified below from the American Society for Testing and Materials are incorporated herein by reference.
(1) D323-99a, "Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)."
(2) D97-96a, "Standard Test Method for Pour Point of Petroleum Products."
(3) D129-00, "Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)."
(4) D388-99, "Standard Classification of Coals by Rank."
(5) D396-98, "Standard Specification for Fuel Oils."
(6) D975-98b, "Standard Specification for Diesel Fuel Oils."
(7) D1072-90(1999), "Standard Test Method for Total Sulfur in Fuel Gases."
(8) D1265-97, "Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)."
(9) D2622-98, "Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-Ray Fluorescence Spectrometry."
(10) D4057-95(2000), "Standard Practice for Manual Sampling of Petroleum and Petroleum Products."
(11) D4294-98, "Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy."
(12) D523-89, "Standard Test Method for Specular Gloss" (1999).
(13) D1613-02, "Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer and Related Products" (2002).
(14) D1640-95, "Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature" (1999).
(15) E119-00a, "Standard Test Methods for Fire Tests of Building Construction Materials" (2000).
(16) E84-01, "Standard Test Method for Surface Burning Characteristics of Building Construction Materials" (2001).
(17) D4214-98, "Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films" (1998).
(18) D86-04b, "Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" (2004).
(19) D4359-90, "Standard Test Method for Determining Whether a Material is a Liquid or a Solid" (reapproved 2000).
(20) E260-96, "Standard Practice for Packed Column Gas Chromatography" (reapproved 2001).
(21) D3912-95, "Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants" (reapproved 2001).
(22) D4082-02, "Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants."
(23) F852-99, "Standard Specification for Portable Gasoline Containers for Consumer Use" (reapproved 2006).
(24) F976-02, "Standard Specification for Portable Kerosine and Diesel Containers for Consumer Use."
(25) D4457-02, "Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph" (reapproved 2008).
(26) D3792-05, "Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph."
(27) D2879-97, "Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope" (reapproved 2007).
b. Copies may be obtained from: American Society for Testing Materials, 100 Barr Harbor Drive, West Conshohocken, Pennsylvania 19428-2959; phone (610) 832-9585.
5. American Petroleum Institute (API).
a. The following document from the American Petroleum Institute is incorporated herein by reference: Evaporative Loss from Floating Roof Tanks, API MPMS Chapter 19, April 1, 1997.
b. Copies may be obtained from: American Petroleum Institute, 1220 L Street, Northwest, Washington, D.C. 20005; phone (202) 682-8000.
6. American Conference of Governmental Industrial Hygienists (ACGIH).
a. The following document from the ACGIH is incorporated herein by reference: 1991-1992 Threshold Limit Values for Chemical Substances and Physical Agents and Biological Exposure Indices (ACGIH Handbook).
b. Copies may be obtained from: ACGIH, 1330 Kemper Meadow Drive, Suite 600, Cincinnati, Ohio 45240; phone (513) 742-2020.
7. National Fire Prevention Association (NFPA).
a. The documents specified below from the National Fire Prevention Association are incorporated herein by reference.
(1) NFPA 385, Standard for Tank Vehicles for Flammable and Combustible Liquids, 2000 Edition.
(2) NFPA 30, Flammable and Combustible Liquids Code, 2000 Edition.
(3) NFPA 30A, Code for Motor Fuel Dispensing Facilities and Repair Garages, 2000 Edition.
b. Copies may be obtained from the National Fire Prevention Association, One Batterymarch Park, P.O. Box 9101, Quincy, Massachusetts 02269-9101; phone (617) 770-3000.
8. American Society of Mechanical Engineers (ASME).
a. The documents specified below from the American Society of Mechanical Engineers are incorporated herein by reference.
(1) ASME Power Test Codes: Test Code for Steam Generating Units, Power Test Code 4.1-1964 (R1991).
(2) ASME Interim Supplement 19.5 on Instruments and Apparatus: Application, Part II of Fluid Meters, 6th edition (1971).
(3) Standard for the Qualification and Certification of Resource Recovery Facility Operators, ASME QRO-1-1994.
b. Copies may be obtained from the American Society of Mechanical Engineers, Three Park Avenue, New York, New York 10016; phone (800) 843-2763.
9. American Hospital Association (AHA).
a. The following document from the American Hospital Association is incorporated herein by reference: An Ounce of Prevention: Waste Reduction Strategies for Health Care Facilities, AHA Catalog no. W5-057007, 1993.
b. Copies may be obtained from: American Hospital Association, One North Franklin, Chicago, IL 60606; phone (800) 242-2626.
10. Bay Area Air Quality Management District (BAAQMD).
a. The following documents from the Bay Area Air Quality Management District are incorporated herein by reference:
(1) Method 41, "Determination of Volatile Organic Compounds in Solvent-Based Coatings and Related Materials Containing Parachlorobenzotrifluoride" (December 20, 1995).
(2) Method 43, "Determination of Volatile Methylsiloxanes in Solvent-Based Coatings, Inks, and Related Materials" (November 6, 1996).
b. Copies may be obtained from: Bay Area Air Quality Management District, 939 Ellis Street, San Francisco, CA 94109, phone (415) 771-6000.
11. South Coast Air Quality Management District (SCAQMD).
a. The following documents from the South Coast Air Quality Management District are incorporated herein by reference:
(1) Method 303-91, "Determination of Exempt Compounds," in Manual SSMLLABM, "Laboratory Methods of Analysis for Enforcement Samples" (1996).
(2) Method 318-95, "Determination of Weight Percent Elemental Metal in Coatings by X-Ray Diffraction," in Manual SSMLLABM, "Laboratory Methods of Analysis for Enforcement Samples" (1996).
(3) Rule 1174 Ignition Method Compliance Certification Protocol (February 28, 1991).
(4) Method 304-91, "Determination of Volatile Organic Compounds (VOC) in Various Materials," in Manual SSMLLABM, "Laboratory Methods of Analysis for Enforcement Samples" (1996).
(5) Method 316A-92, "Determination of Volatile Organic Compounds (VOC) in Materials Used for Pipes and Fittings" in Manual SSMLLABM, "Laboratory Methods of Analysis for Enforcement Samples" (1996).
(6) "General Test Method for Determining Solvent Losses from Spray Gun Cleaning Systems," October 3, 1989.
b. Copies may be obtained from: South Coast Air Quality Management District, 21865 E. Copley Drive, Diamond Bar, CA 91765, phone (909) 396-2000.
12. California Air Resources Board (CARB).
a. The following documents from the California Air Resources Board are incorporated herein by reference:
(1) Test Method 510, "Automatic Shut-Off Test Procedure for Spill-Proof Systems and Spill-Proof Spouts" (July 6, 2000).
(2) Test Method 511, "Automatic Closure Test Procedure for Spill-Proof Systems and Spill-Proof Spouts" (July 6, 2000).
(3) Method 100, "Procedures for Continuous Gaseous Emission Stack Sampling" (July 28, 1997).
(4) Test Method 513, "Determination of Permeation Rate for Spill-Proof Systems" (July 6, 2000).
(5) Method 310, "Determination of Volatile Organic Compounds (VOC) in Consumer Products and Reactive Organic Compounds in Aerosol Coating Products (Including Appendices A and B)" (May 5, 2005).
(6) California Code of Regulations, Title 17, Division 3, Chapter 1, Subchapter 8.5, Article 1, § 94503.5 (2003).
(7) California Code of Regulations, Title 17, Division 3, Chapter 1, Subchapter 8.5, Article 2, §§ 94509 and 94511 (2003).
(8) California Code of Regulations, Title 17, Division 3, Chapter 1, Subchapter 8.5, Article 4, §§ 94540-94555 (2003).
(9) "Certification Procedure 501 for Portable Fuel Containers and Spill-Proof Spouts, CP-501" (July 26, 2006).
(10) "Test Procedure for Determining Integrity of Spill-Proof Spouts and Spill-Proof Systems, TP-501" (July 26, 2006).
(11) "Test Procedure for Determining Diurnal Emissions from Portable Fuel Containers, TP-502" (July 26, 2006).
b. Copies may be obtained from: California Air Resources Board, P.O. Box 2815, Sacramento, CA 95812, phone (906) 322-3260 or (906) 322-2990.
13. American Architectural Manufacturers Association.
a. The following documents from the American Architectural Manufacturers Association are incorporated herein by reference:
(1) Voluntary Specification 2604-02, "Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels" (2002).
(2) Voluntary Specification 2605-02, "Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels" (2002).
b. Copies may be obtained from: American Architectural Manufacturers Association, 1827 Walden Office Square, Suite 550, Schaumburg, IL 60173, phone (847) 303-5664.
14. American Furniture Manufacturers Association.
a. The following document from the American Furniture Manufacturers Association is incorporated herein by reference: Joint Industry Fabrics Standards Committee, Woven and Knit Residential Upholstery Fabric Standards and Guidelines (January 2001).
b. Copies may be obtained from: American Furniture Manufacturers Association, P.O. Box HP-7, High Point, NC 27261; phone (336) 884-5000.
VA.R. Doc. No. R11-2472; Filed September 21, 2010, 11:52 a.m.