Section 230. Reporting requirements

A. The permittee shall comply with the reporting requirements in this section. Any document (including reports) required by a permit term or condition to be submitted to the department shall contain a certification by a responsible official that meets the requirements of 9VAC5-510-100 E.

B. The permittee shall submit, according to procedures established by the department, an annual emissions update. Any additional information requested by the department under this subsection shall be submitted to the department within 30 days of the date of request.

C. To meet the requirements of 9VAC5-510-210 with respect to reporting, the permittee shall submit reports of any required monitoring at least every six months. All instances of deviations from permit requirements shall be clearly identified in such reports.

D. The permittee shall furnish written notification to the department and the regional office of the U.S. Environmental Protection Agency of the following:

1. The actual date on which construction or installation or modification or reconstruction or relocation of any emission unit commenced, postmarked within 30 days after that date.

2. The actual startup date of the emission unit within 15 days after that date.

3. The anticipated date of visible emissions evaluations for affected facilities subject to 40 CFR Part 60, Subpart OOO, postmarked at least 30 days prior to that date.

4. The anticipated date of stack emissions tests of the affected facilities subject to 40 CFR Part 60, Subpart OOO, postmarked at least 30 days prior to that date.

E. Within 30 days of completion, the permittee shall furnish written notification of equipment replacement, to include the following information, as applicable (for crushing, grinding, screening, elevator/belt conveying, bagging, storage bins, and truck/rail enclosed loading stations):

1. The rated capacity, in tons per hour, of the crusher being replaced; and the replacement crusher.

2. The total surface area of the top screen deck of:

a. The screening operation being replaced; and

b. The replacement screening operation.

3. The conveyor belt width of:

a. The conveyor operation being replaced; and

b. The replacement conveyor.

4. The rated storage capacity, in tons, of:

a. The bins being replaced; and

b. The replacement bins.

5. A description of the control device used to reduce particulate matter emissions from the equipment and a list of all other pieces of equipment controlled by the same device.

6. The estimated age of the emissions units being replaced.

7. The identification of the emission standards applicable to the equipment being replaced and the replacement equipment.

F. The permittee shall comply with the reporting requirements of 9VAC5-20-180 concerning facility and control equipment maintenance or malfunction.

Historical Notes

Derived from Volume 19, Issue 03, eff. December 1, 2002.

Statutory Authority

§ 10.1-1308 of the Code of Virginia.