Section 660. Control technology guidelines

Any owner or other person using an adhesive, sealant, adhesive primer or sealant primer subject to this article may comply with the provisions of 9VAC5-45-650 B and D using add-on air pollution control equipment if such equipment meets the following requirements:

1. The VOC emissions from the use of all adhesives, sealants, adhesive primers, or sealant primers subject to this article are reduced by an overall capture and control efficiency of at least 85% by weight;

2. The combustion temperature is monitored continuously if a thermal incinerator is operated;

3. Inlet and exhaust gas temperatures are monitored continuously if a catalytic incinerator is operated;

4. Control device efficiency is monitored continuously if a carbon absorber or control device other than a thermal or catalytic incinerator is operated; and

5. Operation records sufficient to demonstrate compliance with the requirements of this section are maintained as required in 9VAC5-45-730 of this article.

Historical Notes

Derived from Volume 26, Issue 12, eff. March 17, 2010.

Statutory Authority

§ 10.1-1308 of the Code of Virginia.