Virginia Administrative Code (Last Updated: January 10, 2017) |
Title 9. Environment |
Agency 5. State Air Pollution Control Board |
Chapter 45. Consumer and Commercial Products |
Section 320. Alternative control plan (ACP) for consumer products
-
A. 1. Manufacturers of consumer products may seek an ACP agreement in accordance with subsections B through L of this section.
2. Only responsible ACP parties for consumer products may enter into an ACP agreement under the provisions of this section.
B. Provisions follow concerning the requirements and process for approval of an ACP.
1. To be considered by the board for approval, an application for a proposed ACP shall be submitted in writing to the board by the responsible ACP party and shall contain all of the following:
a. An identification of the contact persons, phone numbers, names, and addresses of the responsible ACP party that is submitting the ACP application and will be implementing the ACP requirements specified in the ACP agreement.
b. A statement of whether the responsible ACP party is a small business or a one-product business.
c. A listing of the exact product brand name, form, available variations (flavors, scents, colors, sizes, etc.), and applicable product category for each distinct ACP product that is proposed for inclusion in the ACP.
d. For each proposed ACP product identified in subdivision 1 c of this subsection, a demonstration to the satisfaction of the board that the enforceable sales records to be used by the responsible ACP party for tracking product sales meet the minimum criteria specified in subdivision 1 d (5) of this subsection. To provide this demonstration, the responsible ACP party shall either demonstrate to the satisfaction of the board that other records provided to the board in writing by the responsible ACP party meet the minimum criteria of subdivision 1 d (5) of this subsection for tracking product sales of each ACP product, or do all of the following:
(1) Provide the contact persons, phone numbers, names, street and mail addresses of all persons and businesses who will provide information that will be used to determine the enforceable sales;
(2) Determine the enforceable sales of each product using enforceable sales records;
(3) Demonstrate, to the satisfaction of the board, the validity of the enforceable sales based on enforceable sales records provided by the contact persons or the responsible ACP party;
(4) Calculate the percentage of the gross sales that is composed of enforceable sales; and
(5) Determine which ACP products have enforceable sales that are 75% or more of the gross sales. Only ACP products meeting this criteria shall be allowed to be sold under an ACP.
e. For each of the ACP products identified in subdivision 1 d (5) of this subsection, the inclusion of the following:
(1) Legible copies of the existing labels for each product;
(2) The VOC content and LVP content for each product. The VOC content and LVP content shall be reported for two different periods as follows:
(a) The VOC and LVP contents of the product at the time the application for an ACP is submitted, and
(b) The VOC and LVP contents of the product that were used at any time within the four years prior to the date of submittal of the application for an ACP if either the VOC or LVP contents have varied by more than plus or minus 10% of the VOC or LVP contents reported in subdivision 1 e (2) (a) of this subsection.
f. A written commitment obligating the responsible ACP party to date-code every unit of each ACP product approved for inclusion in the ACP. The commitment shall require the responsible ACP party to display the date-code on each ACP product container or package no later than five working days after the date an ACP agreement approving an ACP is signed by the board.
g. An operational plan covering all the products identified under subdivision 1 d (5) of this subsection for each compliance period that the ACP will be in effect. The operational plan shall contain all of the following:
(1) An identification of the compliance periods and dates for the responsible ACP party to report the information required by the board in the ACP agreement approving an ACP. The length of the compliance period shall be chosen by the responsible ACP party (not to exceed 365 days). The responsible ACP party shall also choose the dates for reporting information such that all required VOC content and enforceable sales data for all ACP products shall be reported to the board at the same time and at the same frequency .
(2) An identification of specific enforceable sales records to be provided to the board for enforcing the provisions of this article and the ACP agreement approving an ACP. The enforceable sales records shall be provided to the board no later than the compliance period dates specified in subdivision 1 g (1) of this subsection.
(3) For a small business or a one-product business that will be relying to some extent on surplus trading to meet its ACP limits, a written commitment from the responsible ACP party that they will transfer the surplus reductions to the small business or one-product business upon approval of the ACP.
(4) For each ACP product, all VOC content levels that will be applicable for the ACP product during each compliance period. The plan shall also identify the specific method by which the VOC content will be determined and the statistical accuracy and precision (repeatability and reproducibility) will be calculated for each specified method.
(5) The projected enforceable sales for each ACP product at each different VOC content for every compliance period that the ACP will be in effect.
(6) A detailed demonstration showing the combination of specific ACP reformulations or surplus trading (if applicable) that is sufficient to ensure that the ACP emissions will not exceed the ACP limit for each compliance period that the ACP will be in effect, the approximate date within each compliance period that such reformulations or surplus trading are expected to occur, and the extent to which the VOC contents of the ACP products will be reduced (i.e., by ACP reformulation). This demonstration shall use the equations specified in 9VAC5-45-300 C for projecting the ACP emissions and ACP limits during each compliance period. This demonstration shall also include all VOC content levels and projected enforceable sales for all ACP products to be sold during each compliance period.
(7) A certification that all reductions in the VOC content of a product will be real, actual reductions that do not result from changing product names, mischaracterizing ACP product reformulations that have occurred in the past, or other attempts to circumvent the provisions of this article.
(8) Written explanations of the date-codes that will be displayed on each ACP product's container or packaging.
(9) A statement of the approximate dates by which the responsible ACP party plans to meet the applicable ACP VOC standards for each product in the ACP.
(10) An operational plan ("reconciliation of shortfalls plan") that commits the responsible ACP party to completely reconcile shortfalls, even, to the extent permitted by law, if the responsible ACP party files for bankruptcy protection. The plan for reconciliation of shortfalls shall contain all of the following:
(a) A clear and convincing demonstration of how shortfalls of up to 5.0%, 10%, 15%, 25%, 50%, 75% and 100% of the applicable ACP limit will be completely reconciled within 90 working days from the date the shortfall is determined;
(b) A listing of the specific records and other information that will be necessary to verify that the shortfalls were reconciled as specified in this subsection; and
(c) A commitment to provide a record or information requested by the board to verify that the shortfalls have been completely reconciled.
h. A declaration, signed by a legal representative for the responsible ACP party, that states that all information and operational plans submitted with the ACP application are true and correct.
2. a. In accordance with the time periods specified in subsection C of this section, the board will issue an ACP agreement approving an ACP that meets the requirements of this article. The board will specify such terms and conditions as are necessary to ensure that the emissions from the ACP products do not exceed the emissions that would have occurred if the ACP products subject to the ACP had met the VOC standards specified in 9VAC5-45-310 A. The ACP shall also include:
(1) Only those ACP products for which the enforceable sales are at least 75% of the gross sales as determined in subdivision 1 d (5) of this subsection;
(2) A reconciliation of shortfalls plan meeting the requirements of this article; and
(3) Operational terms, conditions, and data to be reported to the board to ensure that all requirements of this article are met.
b. The board will not approve an ACP submitted by a responsible ACP party if the board determines, upon review of the responsible ACP party's compliance history with past or current ACPs or the requirements for consumer products in this article, that the responsible ACP party has a recurring pattern of violations and has consistently refused to take the necessary steps to correct those violations.
C. Provisions follow concerning ACP approval time frames.
1. The board will take appropriate action on an ACP within the following time periods:
a. Within 30 working days of receipt of an ACP application, the board will inform the applicant in writing that either:
(1) The application is complete and accepted for filing, or
(2) The application is deficient, and identify the specific information required to make the application complete.
b. Within 30 working days of receipt of additional information provided in response to a determination that an ACP application is deficient, the board will inform the applicant in writing that either:
(1) The additional information is sufficient to make the application complete, and the application is accepted for filing, or
(2) The application is deficient, and identify the specific information required to make the application complete.
c. If the board finds that an application meets the requirements of subsection B of this section, then it shall issue an ACP agreement in accordance with the requirements of this article. The board will normally act to approve or disapprove a complete application within 90 working days after the application is deemed complete. The board may extend this time period if additional information is needed.
2. Before the end of each time period specified in this section, the board and the responsible ACP party may mutually agree to a longer time period for the board to take the appropriate action.
D. Provisions follow concerning recordkeeping and availability of requested information.
1. All information specified in the ACP agreement approving an ACP shall be maintained by the responsible ACP party for a minimum of three years after such records are generated. Such records shall be clearly legible and maintained in good condition during this period.
2. The records specified in subdivision 1 of this subsection shall be made available to the board or its authorized representative:
a. Immediately upon request, during an on-site visit to a responsible ACP party,
b. Within five working days after receipt of a written request from the board, or
c. Within a time period mutually agreed upon by both the board and the responsible ACP party.
E. Provisions follow concerning violations.
1. Failure to meet a requirement of this article or a condition of an applicable ACP agreement shall constitute a single, separate violation of this article for each day until such requirement or condition is satisfied, except as otherwise provided in subdivisions 2 through 8 of this subsection.
2. False reporting of information in an ACP application or in any supporting documentation or amendments thereto shall constitute a single, separate violation of the requirements of this article for each day that the approved ACP is in effect.
3. An exceedance during the applicable compliance period of the VOC content specified for an ACP product in the ACP agreement approving an ACP shall constitute a single, separate violation of the requirements of this article for each ACP product that exceeds the specified VOC content that is sold, supplied, offered for sale, or manufactured for use.
4. Any of the following actions shall each constitute a single, separate violation of the requirements of this article for each day after the applicable deadline until the requirement is satisfied:
a. Failure to report data or failure to report data accurately in writing to the board regarding the VOC content, LVP content, enforceable sales, or other information required by the deadline specified in the applicable ACP agreement;
b. False reporting of information submitted to the board for determining compliance with the ACP requirements;
c. Failure to completely implement the reconciliation of shortfalls plan that is set forth in the ACP agreement within 30 working days from the date of written notification of a shortfall by the board; or
d. Failure to completely reconcile the shortfall as specified in the ACP agreement within 90 working days from the date of written notification of a shortfall by the board.
5. False reporting or failure to report any of the information specified in subdivision F 2 i of this section or the sale or transfer of invalid surplus reductions shall constitute a single, separate violation of the requirements of this article for each day during the time period for which the surplus reductions are claimed to be valid.
6. Except as provided in subdivision 7 of this subsection, an exceedance of the ACP limit for a compliance period that the ACP is in effect shall constitute a single, separate violation of the requirements of this article for each day of the applicable compliance period. The board will determine whether an exceedance of the ACP limit has occurred as follows:
a. If the responsible ACP party has provided all required information for the applicable compliance period specified in the ACP agreement approving an ACP, then the board will determine whether an exceedance has occurred using the enforceable sales records and VOC content for each ACP product as reported by the responsible ACP party for the applicable compliance period.
b. If the responsible ACP party has failed to provide all the required information specified in the ACP agreement for an applicable compliance period, the board will determine whether an exceedance of the ACP limit has occurred as follows.
(1) For the missing data days, the board will calculate the total maximum historical emissions as specified in 9VAC5-45-300 C.
(2) For the remaining portion of the compliance period that are not missing data days, the board will calculate the emissions for each ACP product using the enforceable sales records and VOC content that were reported for that portion of the applicable compliance period.
(3) The ACP emissions for the entire compliance period shall be the sum of the total maximum historical emissions, determined pursuant to subdivision 6 b (1) of this subsection, and the emissions determined pursuant to subdivision 6 b (2) of this subsection.
(4) The board will calculate the ACP limit for the entire compliance period using the ACP standards applicable to each ACP product and the enforceable sales records specified in subdivision 6 b (2) of this subsection. The enforceable sales for each ACP product during missing data days, as specified in subdivision 6 b (1) of this subsection, shall be zero.
(5) An exceedance of the ACP limit has occurred when the ACP emissions, determined pursuant to subdivision 6 b (3) of this subsection, exceeds the ACP limit, determined pursuant to subdivision 6 b (4) of this subsection.
7. If a violation specified in subdivision 6 of this subsection occurs, the responsible ACP party may, pursuant to this subdivision, establish the number of violations as calculated according to the following equation:
where:
NEV = number of ACP limit violations.
ACP emissions = the ACP emissions for the compliance period.
ACP limit = the ACP limit for the compliance period.
40 pounds = number of pounds of emissions equivalent to one violation.
The responsible ACP party may determine the number of ACP limit violations pursuant to this subdivision only if it has provided all required information for the applicable compliance period, as specified in the ACP agreement approving the ACP. By choosing this option, the responsible ACP party waives all legal objections to the calculation of the ACP limit violations pursuant to this subdivision.
8. A cause of action against a responsible ACP party under this section shall be deemed to accrue on the date when the records establishing a violation are received by the board.
9. The responsible ACP party is fully liable for compliance with the requirements of this article, even if the responsible ACP party contracts with or otherwise relies on another person to carry out some or all of the requirements of this article.
F. Provisions follow concerning surplus reductions and surplus trading.
1. The board will issue surplus reduction certificates that establish and quantify, to the nearest pound of VOC reduced, the surplus reductions achieved by a responsible ACP party operating under an ACP. The surplus reductions can be bought from, sold to, or transferred to a responsible ACP party operating under an ACP, as provided in subdivision 2 of this subsection. All surplus reductions shall be calculated by the board at the end of each compliance period within the time specified in the approved ACP. Surplus reduction certificates shall not constitute instruments, securities, or another form of property.
2. The issuance, use, and trading of all surplus reductions shall be subject to the following provisions:
a. For the purposes of this article, VOC reductions from sources of VOCs other than consumer products subject to the VOC standards specified in 9VAC5-45-310 A may not be used to generate surplus reductions.
b. Surplus reductions are valid only when generated by a responsible ACP party and only while that responsible ACP party is operating under an approved ACP.
c. Surplus reductions are valid only after the board has issued an ACP agreement pursuant to subdivision 1 of this subsection.
d. Surplus reductions issued by the board may be used by the responsible ACP party who generated the surplus until the reductions expire, are traded, or until the ACP is canceled pursuant to subdivision J 2 of this section.
e. Surplus reductions cannot be applied retroactively to a compliance period prior to the compliance period in which the reductions were generated.
f. Except as provided in subdivision 2 g (2) of this subsection, only small or one-product businesses selling products under an approved ACP may purchase surplus reductions. An increase in the size of a small business or one-product business shall have no effect on surplus reductions purchased by that business prior to the date of the increase.
g. While valid, surplus reductions can be used only for the following purposes:
(1) To adjust the ACP emissions of either the responsible ACP party who generated the reductions or the responsible ACP party to which the reductions were traded, provided the surplus reductions are not to be used by a responsible ACP party to further lower its ACP emissions when its ACP emissions are equal to or less than the ACP limit during the applicable compliance period; or
(2) To be traded for the purpose of reconciling another responsible ACP party's shortfalls, provided such reconciliation is part of the reconciliation of shortfalls plan approved by the board pursuant to subdivision B 1 g (10) of this section.
h. A valid surplus reduction shall be in effect starting five days after the date of issuance by the board for a continuous period equal to the number of days in the compliance period during which the surplus reduction was generated. The surplus reduction shall then expire at the end of its effective period.
i. At least five working days prior to the effective date of transfer of surplus reductions, both the responsible ACP party that is selling surplus reductions and the responsible ACP party that is buying the surplus reductions shall, either together or separately, notify the board in writing of the transfer. The notification shall include all of the following:
(1) The date the transfer is to become effective.
(2) The date the surplus reductions being traded are due to expire.
(3) The amount (in pounds of VOCs) of surplus reductions that is being transferred.
(4) The total purchase price paid by the buyer for the surplus reductions.
(5) The contact persons, names of the companies, street and mail addresses, and phone numbers of the responsible ACP parties involved in the trading of the surplus reductions.
(6) A copy of the board-issued surplus reductions certificate, signed by both the seller and buyer of the certificate, showing transfer of all or a specified portion of the surplus reductions. The copy shall show the amount of any remaining nontraded surplus reductions, if applicable, and shall show their expiration date. The copy shall indicate that both the buyer and seller of the surplus reductions fully understand the conditions and limitations placed upon the transfer of the surplus reductions and accept full responsibility for the appropriate use of such surplus reductions as provided in this section.
j. Surplus reduction credits shall only be traded between ACP products.
3. Provisions follow concerning limited-use surplus reduction credits for early reformulations of ACP products.
a. For the purposes of this subdivision, "early reformulation" means an ACP product that is reformulated to result in a reduction in the product's VOC content, and that is sold, supplied, or offered for sale for the first time during the one-year (365 day) period immediately prior to the date on which the application for a proposed ACP is submitted to the board. Early reformulation does not include reformulated ACP products that are sold, supplied, or offered for sale more than one year prior to the date on which the ACP application is submitted to the board.
b. If requested in the application for a proposed ACP, the board will, upon approval of the ACP, issue surplus reduction credits for early reformulation of ACP products, provided that all of the following documentation has been provided by the responsible ACP party to the satisfaction of the board:
(1) Accurate documentation showing that the early reformulation reduced the VOC content of the ACP product to a level that is below the pre-ACP VOC content of the product or below the applicable VOC standard specified in 9VAC 5-45-310 A, whichever is the lesser of the two;
(2) Accurate documentation demonstrating that the early reformulated ACP product was sold in retail outlets within the time period specified in subdivision 3 a of this subsection;
(3) Accurate sales records for the early reformulated ACP product that meet the definition of enforceable sales records and that demonstrate that the enforceable sales for the ACP product are at least 75% of the gross sales for the product, as specified in subdivision B 1 d of this section; and
(4) Accurate documentation for the early reformulated ACP product that meets the requirements specified in subdivisions B 1 c and d and B 1 g (7) and (8) of this section and that identifies the specific test methods for verifying the claimed early reformulation and the statistical accuracy and precision of the test methods as specified in subdivision B 1 g (4) of this section.
c. Surplus reduction credits issued pursuant to this subsection shall be calculated separately for each early reformulated ACP product by the board according to the following equation:
where:
SR = surplus reductions for the ACP product, expressed to the nearest pound.
Enforceable sales = the enforceable sales for the early reformulated ACP product, expressed to the nearest pound of ACP product.
VOC contentinitial = the pre-ACP VOC content of the ACP product, or the applicable VOC standard specified in 9VAC5-45-310 A, whichever is the lesser of the two, expressed to the nearest 0.1 pounds of VOC per 100 pounds of ACP product.
VOC contentfinal = the VOC content of the early reformulated ACP product after the early reformulation is achieved, expressed to the nearest 0.1 pounds of VOC per 100 pounds of ACP product.
d. The use of limited use surplus reduction credits issued pursuant to this subdivision shall be subject to all of the following provisions:
(1) Limited use surplus reduction credits shall be used solely to reconcile the responsible ACP party's shortfalls, if any, generated during the first compliance period occurring immediately after the issuance of the ACP agreement approving an ACP, and may not be used for another purpose;
(2) Limited use surplus reduction credits may not be transferred to, or used by, another responsible ACP party; and
(3) Except as provided in this subdivision, limited use surplus reduction credits shall be subject to all requirements applicable to surplus reductions and surplus trading as specified in subdivisions 1 and 2 of this subsection.
G. Provisions follow concerning the reconciliation of shortfalls.
1. At the end of each compliance period, the responsible ACP party shall make an initial calculation of shortfalls occurring in that compliance period as specified in the ACP agreement approving the ACP. Upon receipt of this information, the board will determine the amount of a shortfall that has occurred during the compliance period and shall notify the responsible ACP party of this determination.
2. The responsible ACP party shall implement the reconciliation of shortfalls plan as specified in the ACP agreement approving the ACP within 30 working days from the date of written notification of a shortfall by the board.
3. All shortfalls shall be completely reconciled within 90 working days from the date of written notification of a shortfall by the board by implementing the reconciliation of shortfalls plan specified in the ACP agreement approving the ACP.
4. All requirements specified in the ACP agreement approving an ACP, including all applicable ACP limits, shall remain in effect while shortfalls are in the process of being reconciled.
H. Provisions follow concerning the notification of modifications to an ACP by the responsible ACP party.
1. Board pre-approval is not required for modifications that are a change to an ACP product's: (i) product name, (ii) product formulation, (iii) product form, (iv) product function, (v) applicable product category, (vi) VOC content, (vii) LVP content, (viii) date-codes, or (ix) recommended product usage directions. The responsible ACP party shall notify the board of such changes, in writing, no later than 15 working days from the date such a change occurs. For each modification, the notification shall fully explain the following:
a. The nature of the modification;
b. The extent to which the ACP product formulation, VOC content, LVP content, or recommended usage directions will be changed;
c. The extent to which the ACP emissions and ACP limit specified in the ACP agreement will be changed for the applicable compliance period; and
d. The effective date and corresponding date-codes for the modification.
2. The responsible ACP party may propose modifications to the enforceable sales records or the reconciliation of shortfalls plan specified in the ACP agreement approving the ACP, however, such modifications require board pre-approval. Any such proposed modifications shall be fully described in writing and forwarded to the board. The responsible ACP party shall clearly demonstrate that the proposed modifications will meet the requirements of this article. The board will act on the proposed modifications using the procedure set forth in subsection C of this section. The responsible ACP party shall meet all applicable requirements of the existing ACP until such time as a proposed modification is approved in writing by the board.
3. Except as otherwise provided in subdivisions 1 and 2 of this subsection, the responsible ACP party shall notify the board, in writing, of information known by the responsible ACP party that may alter the information submitted pursuant to the requirements of subsection B of this section. The responsible ACP party shall provide such notification to the board no later than 15 working days from the date such information is known to the responsible ACP party.
I. Provisions follow concerning the modification of an ACP by the board.
1. If the board determines that: (i) the enforceable sales for an ACP product are no longer at least 75% of the gross sales for that product, (ii) the information submitted pursuant to the approval process set forth in subsection C of this section is no longer valid, or (iii) the ACP emissions are exceeding the ACP limit specified in the ACP agreement approving an ACP, then the board will modify the ACP as necessary to ensure that the ACP meets all requirements of this article and that the ACP emissions will not exceed the ACP limit.
2. If any applicable VOC standards specified in 9VAC5-45-310 A are modified by the board in a future rulemaking, the board will modify the ACP limit specified in the ACP agreement approving an ACP to reflect the modified ACP VOC standards as of their effective dates.
J. Provisions follow concerning the cancellation of an ACP.
1. An ACP shall remain in effect until:
a. The ACP reaches the expiration date specified in the ACP agreement;
b. The ACP is modified by the responsible ACP party and approved by the board as provided in subsection H of this section;
c. The ACP is modified by the board as provided in subsection I of this section;
d. The ACP includes a product for which the VOC standard specified in 9VAC5-45-310 A is modified by the board in a future rulemaking, and the responsible ACP party informs the board in writing that the ACP will terminate on the effective date of the modified standard; or
e. The ACP is cancelled pursuant to subdivision 2 of this subsection.
2. The board will cancel an ACP if any of the following circumstances occur:
a. The responsible ACP party demonstrates to the satisfaction of the board that the continuation of the ACP will result in an extraordinary economic hardship.
b. The responsible ACP party violates the requirements of the approved ACP, and the violation results in a shortfall that is 20% or more of the applicable ACP limit (i.e., the ACP emissions exceed the ACP limit by 20% or more).
c. The responsible ACP party fails to meet the requirements of subsection G of this section within the time periods specified in that subsection.
d. The responsible ACP party has demonstrated a recurring pattern of violations and has consistently failed to take the necessary steps to correct those violations.
3. Cancellations of ACPs are considered case decisions and will be processed using the procedures prescribed in 9VAC5-170-40 A 2 and applicable provisions of Article 3 (§ 2.2-4018 et seq.) of the Administrative Process Act.
4. The responsible ACP party for an ACP that is canceled pursuant to this section and who does not have a valid ACP to immediately replace the canceled ACP shall meet all of the following requirements:
a. All remaining shortfalls in effect at the time of ACP cancellation shall be reconciled in accordance with the requirements of subsection G of this section, and
b. All ACP products subject to the ACP shall be in compliance with the applicable VOC standards in 9VAC5-45-310 A immediately upon the effective date of ACP cancellation.
5. Violations incurred pursuant to subsection E of this section shall not be cancelled or affected by the subsequent cancellation or modification of an ACP pursuant to subsection H, I, or J of this section.
K. The information required by subdivisions B 1 a and b and F 2 i of this section is public information that may not be claimed as confidential. Other information submitted to the board to meet the requirements of this section shall be available to the public except where the owner makes a showing satisfactory to the board under 9VAC5-170-60 B that the information meets the criteria in 9VAC5-170-60 C, in which case the information shall be handled in accordance with the procedures specified in §§ 10.1-1314 and 10.1-1314.1 of the Air Pollution Control Law of Virginia.
L. A responsible ACP party may transfer an ACP to another responsible ACP party, provided that all of the following conditions are met:
1. The board will be notified, in writing, by both responsible ACP parties participating in the transfer of the ACP and its associated ACP agreement. The written notifications shall be postmarked at least five working days prior to the effective date of the transfer and shall be signed and submitted separately by both responsible parties. The written notifications shall clearly identify the contact persons, business names, mail and street addresses, and phone numbers of the responsible parties involved in the transfer.
2. The responsible ACP party to which the ACP is being transferred shall provide a written declaration stating that the transferee shall fully comply with all requirements of the ACP agreement approving the ACP and this article.
M. In approving agreements under subsections B through L of this section, the board will take into consideration whether the applicant has been granted an ACP by CARB. A manufacturer of consumer products that has been granted an ACP agreement by the CARB under the provisions in Subchapter 8.5, Article 4, Sections 94540-94555, of Title 17 of the California Code of Regulations (see 9VAC5-20-21) may be exempt from Table 45-3A for the period of time that the CARB ACP agreement remains in effect provided that all ACP products used for emission credits within the CARB ACP agreement are contained in Table 45-3A. A manufacturer claiming such an ACP agreement on this basis must submit to the board a copy of the CARB ACP decision (i.e., the executive order), including all conditions established by CARB applicable to the exemption and certification that the manufacturer will comply with the CARB ACP decision for those ACP products in the areas specified in 9VAC5-45-280 C.
Historical Notes
Derived from Volume 26, Issue 12, eff. March 17, 2010.
Statutory Authority
§ 10.1-1308 of the Code of Virginia.