Section 290. Actual well or corehole location

A. The actual horizontal surface location of the well shall be within three feet of the permitted location designated on the well plat, except where an operator has stated that the location may vary up to 10 feet in the notice as required in § 45.1-361.30 of the Code of Virginia.

B. The permittee shall survey the actual location of the well which may be made from a minimum of two temporary points not disturbed during development of the well or site and shown on the plat submitted with the permit application. The permittee shall submit an updated plat, certified by a licensed land surveyor or licensed professional engineer, showing the actual well location certified to be within three feet of the permitted location, or within 10 feet as provided for in subsection A of this section. This updated plat shall be included with the drilling report submitted in accordance with 4VAC25-150-360.

Historical Notes

Derived from VR480-05-22.1 § 1.29, eff. September 25, 1991; amended, Volume 15, Issue 02, eff. November 11, 1998.

Statutory Authority

§§ 45.1-161.3 and 45.1-361.27 of the Code of Virginia.