Section 60. General knowledge requirements for certified fertilizer applicators; continuing education

A. All applicants for certification as a certified fertilizer applicator shall demonstrate practical knowledge of the principles and practices of the environmentally safe use of fertilizer.

B. Applicants shall be tested on their knowledge and qualifications concerning the use of fertilizer and the handling of fertilizer in the board-approved training. Testing will be based on problems and situations in the following core areas:

1. Proper nutrient management practices such as allowable rate of application for nutrients for various types of vegetation and determining quantity of product to apply based on nutrient analysis;

2. Timing of application during appropriate seasons for various types of vegetation and restrictions on intervals for reapplication;

3. Soil analysis techniques and interpretation of soil analysis results such as proper frequency and depth of sampling and determining appropriate rates of application based on soil analyses;

4. Equipment calibration techniques and procedures for liquid and dry fertilizer applicators and determination of size of application areas;

5. Understanding and interpreting fertilizer labels;

6. Proper handling and appropriate notification procedures of accidents and incidents;

7. Proper methods of storing, mixing, loading, transporting, handling, applying, and disposing of fertilizer;

8. Managing applications near impervious surfaces such as streets, driveways, sidewalks, or paved ditches, as well as near water bodies to avoid off-target applications;

9. Safety and health, including proper use of personal protective equipment; and

10. Recordkeeping and reporting requirements of this regulation.

C. Continuing education requirement. Certified fertilizer applicators shall complete a minimum of two hours of course work every two years on at least one of the following:

1. Proper nutrient management practices;

2. Timing of fertilizer application;

3. Soil analysis techniques and interpretation;

4. Equipment calibration;

5. Understanding and interpreting fertilizer labels; or

6. Management of fertilizer applications near impervious surfaces.

The courses may be offered by any state agency or private entity recognized by the board.

Historical Notes

Derived from Volume 28, Issue 01, eff. October 12, 2011; amended, Virginia Register Volume 28, Issue 09, eff. February 1, 2012.

Statutory Authority

§ 3.2-3602.1 of the Code of Virginia.