Section 150. Subdivision street development, plan review, and acceptance

Part III. Reference Section

A. The county-state partnership governing VDOT acceptance of new streets for maintenance. Section 33.2-705 of the Code of Virginia (a Byrd Act provision) creates the authority under which local governments establish new roads as part of the secondary system of state highways. Sections 15.2-2240 and 15.2-2241 of the Code of Virginia establish the authority of local subdivision ordinances and the authority of counties to set the standards for new streets within their territories.

VDOT's participation in the development and acceptance of subdivision streets for maintenance is a cooperative commitment of the Commonwealth Transportation Board.

VDOT's concurrence with or approval of a construction plan represents VDOT's commitment to accept the streets shown on the plan when satisfactorily constructed and all other requirements governing the department's acceptance of streets are satisfied, including the governing body's request for the acceptance of or transfer of the maintenance and operational jurisdiction over the street, as outlined in these requirements.

Pursuant to these principles:

1. Local government controls land development activity and establishes new streets, the relocation of existing streets, and the criteria governing the development of such streets.

2. VDOT establishes the minimum standards that must be satisfied for new subdivision streets to be considered for maintenance by the department as part of the secondary system of state highways under its jurisdiction.

Within each locality, VDOT is represented by a resident engineer or comparable designee.

B. Street development and acceptance of maintenance process.

1. Concept and construction plan approval phase. The proposed construction plan shall be considered incomplete in the absence of a preliminary pavement design based on the Pavement Design Guide (24VAC30-91-160) and the presumed values therein.

2. Construction phase. Upon approval of the construction plan and prior to construction, the resident engineer should advise the developer regarding inspection of the construction phases and the scheduling of those inspections. VDOT approval of each of the following phases of construction is recommended.

a. Installation of any enclosed drainage system before it is covered.

b. Installation of any enclosed utility placements within the right-of-way before being covered.

c. Construction of the cuts and fills, including field density tests, before placement of roadbed base materials.

d. A final pavement design, based on actual soil characteristics and certified tests, shall be completed and approved before the pavement structure is placed.

e. Placement of base materials, including stone depths, consistent with the approved pavement design, prior to placement of the paving course or courses, followed by field density and moisture tests and the placement of a paving course as soon as possible.

f. Construction of pavement, including depth and density, upon completion as part of the final inspection.

3. Street acceptance process. In the absence of any other formal acceptance, the governing body's resolution requesting the department to accept a street for maintenance as part of the secondary system of state highways completes the dedication and is deemed to constitute the governing body's acceptance of the street.

4. Post acceptance phase.

Historical Notes

Derived from Volume 21, Issue 06, eff. January 1, 2005; amended, Virginia Register Volume 31, Issue 07, eff. December 31, 2014.

Statutory Authority

§§ 33.2-210, 33.2-241, 33.2-326, and 33.2-705 of the Code of Virginia.