Section 260. Hood latch system

A. "Hood" means any exterior movable body panel forward of the windshield that is used to cover an engine, luggage, storage or battery compartment.

B. Inspect for and reject if:

1. Each hood is not provided with a hood latch system that will securely hold the hood in its proper fully-closed position.

2. A latch release mechanism or its parts are broken, missing or badly adjusted so that the hood cannot be opened and closed properly.

NOTE: The hood latch release inside the passenger compartment is only for security and shall not be rejected under this section. If the hood latch cable can be accessed from either the inside or outside of the vehicle and opened by pliers or similar method, then it will pass.

3. Latching system on a vehicle equipped with a tilt cab is defective, broken, missing, or not properly adjusted so that the tilt cab is held securely when it is in its latched position.

Historical Notes

Derived from VR545-01-07 § 26, eff. May 1, 1990; amended, Volume 10, Issue 08, eff. February 9, 1994; Volume 21, Issue 04, eff. September 22, 2004; Volume 28, Issue 24, eff. August 1, 2012.

Statutory Authority

§ 46.2-1165 of the Code of Virginia.