 |
Virginia Administrative Code (Last Updated: January 10, 2017) |
 |
Title 16. Labor and Employment |
|
Agency 25. Safety and Health Codes Board |
|
Chapter 50. Boiler and Pressure Vessel Regulations |
Section 410. Removal of covering to permit inspection
-
If the boiler or pressure vessel is jacketed so that the seams of shells, drums, or domes cannot be seen, sufficient jacketing, setting wall, or other form of casing or housing shall be removed to permit reasonable inspection of the seams and so that the size of the rivets, pitch of the rivets, and other data necessary to determine the safety of the boiler or pressure vessel may be obtained, provided such information cannot be determined by other means.
The inspector shall not remove any insulation or covering and may refuse to enter boiler or equipment rooms where the inspector believes an asbestos exposure exists. To determine if an asbestos exposure may exist, the inspector may request to review the owner or user's asbestos maintenance program, where applicable, under the Virginia Occupational Safety and Health (VOSH) Program, Occupational Exposure to Asbestos, Construction Industry, Appendix G, 16VAC25-175-1926.1101.
Historical Notes
Derived from VR425-01-75 § 4.3, eff. July 1, 1974; amended, eff. November 1, 1978; July 1, 1991; September 1, 1993.