Virginia Administrative Code (Last Updated: January 10, 2017) |
Title 12. Health |
Agency 5. Department of Health |
Chapter 590. Waterworks Regulations |
Appendix 9999. DOCUMENTS INCORPORATED BY REFERENCE (12VAC5-590)
-
"Maximum Permissible Body Burdens and Maximum Permissible Concentration of Radionuclides in Air or Water for Occupational Exposure," National Bureau of Standards Handbook 69.
Standard Methods for the Examination of Water and Wastewater, 18th edition, American Public Health Association, American Waterworks Association, and Water Pollution Control Federation, 1992.
ANSI/NSF Standard for Drinking Water Treatment System Components, ANSI/NSF 61, American National Standard Institute, November, 1994.
AWWA Standard for American National Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water, C-104, American Waterworks Association.
AWWA Standard for American National Standard for Polyethylene Encasement for Ductile-Iron Pipe and Fittings for Water, C-105, American Waterworks Association.
AWWA Standard for American National Standard for Ductile-Iron and Gray-Iron Fittings 3 Inch Through 48 Inch for Water, C-110, American Waterworks Association.
AWWA Standard for American National Standard for Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings, C-111, American Waterworks Association.
AWWA Standard for American National Standard for Flanged Ductile-Iron Pipe with Threaded Flanges, C-115, American Waterworks Association.
AWWA Standard for American National Standard for the Thickness Design of Ductile-Iron Pipe, C-150, American Waterworks Association.
AWWA Standard for American National Standard for Ductile-Iron Pipe, Centrifugally Cast, for Water or Other Liquids, C-151, American Waterworks Association.
AWWA Standard for American National Standard for Ductile-Iron Pipe, Compact Fittings, 3 Inch Through 16 Inch, for Water and Other Liquids, C-153, American Waterworks Association.
AWWA Standard for Steel Water Pipe, 6 Inch and Larger, C-200, American Waterworks Association.
AWWA Standard for Coal-Tar Protective Coatings and Linings for Steel Water Pipelines- Enamel and Tape-Hot Applied, C-203, American Waterworks Association.
AWWA Standard for Cement-Mortar Protective Lining and Coating for Steel Water Pipe-4 Inch and Larger-Shop Applied, C-205, American Waterworks Association.
AWWA Standard for Field Welding of Steel Water Pipe, C-206, American Waterworks Association.
AWWA Standard for Steel Pipe Flanges for Waterworks Service-4 Inch and Larger-Shop Applied, C-207, American Waterworks Association.
AWWA Standard for Dimensions for Fabricated Steel Water Pipe Fittings, C-208, American Waterworks Association.
AWWA Standards for Cold-Applied Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines, C-209, American Waterworks Association.
AWWA Standard for Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines, C-210, American Waterworks Association.
AWWA Standard for Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines, C-213, American Waterworks Association.
AWWA Standards for Tape Coating Systems for the Exterior of Steel Water Pipelines, C-214, American Waterworks Association.
AWWA Standard for Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines, C-215, American Waterworks Association.
AWWA Standard for Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fittings for Buried Steel Water Pipelines, C-216, American Waterworks Association.
AWWA Standard for Cold-Applied Petrolatum Tape and Petroleum Wax Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Buried Steel Water Pipelines, C-217, American Waterworks Association.
AWWA Standard for Coating the Exterior of Aboveground Steel Water Pipelines and Fittings, C-218, American Waterworks Association.
AWWA Standard for Bolted, Sleeve-Type Couplings for Plain-End Pipe, C-219, American Waterworks Association.
AWWA Standard for Stainless Steel Pipe, 4 Inch and Larger, C-220, American Waterworks Association.
AWWA Standard for Reinforced Concrete Pressure Pipe, Steel-Cylinder Type, for Water and Other Liquids, C-300, American Waterworks Association.
AWWA Standard for Prestressed Concrete Pressure Pipe, Steel-Cylinder Type, for Water and Other Liquids, C-301, American Waterworks Association.
AWWA Standard for Reinforced Concrete Pressure Pipe, Noncylinder Type, for Water and Other Liquids, C-302, American Waterworks Association.
AWWA Standard for Reinforced Concrete Pressure Pipe, Noncylinder Type, Pretensioned, for Water and Other Liquids, C-303, American Waterworks Association.
AWWA Standard for Design of Prestressed Concrete Cylinder Pipe, C-304, American Waterworks Association.
AWWA Standard for the Selection of Asbestos-Cement Transmission and Feeder Main Pipe, C-403, American Waterworks Association.
AWWA Standard for Cement-Mortar Lining of Water Pipelines-4 Inch (1000 mm) and Larger-In Place, C-602, American Waterworks Association.
AWWA Standard for Underground Service Line Valves and Fittings, C-800, American Waterworks Association.
AWWA Standard for Polyvinyl Chloride Pressure Pipe, 4 Inch Through 12 Inch for Water Distribution, C-900, American Waterworks Association.
AWWA Standard for Polybutylene Pressure Pipe and Tubings, 1/2 Inch Through 3 Inch, for Water Service, C-902, American Waterworks Association.
AWWA Standard for Polyethylene Pressure Pipe and Fittings, 4 Inch Through 63 Inch, for Water Distribution, C-906, American Waterworks Association.
AWWA Standard for Polyethylene Pressure Pipe and Tubing, 1/2 Inch Through 3 Inch, for Water Service, C-901, American Waterworks Association.
AWWA Standard for Polyvinyl Chloride Water Transmission Pipe, Nominal Diameters 14 Inch Through 36 Inch, C-905, American Waterworks Association.
AWWA Standard for Polyvinyl Chloride Pressure Fittings, 4 Inch Through 8 Inch, C-907, American Waterworks Association.
AWWA Standard for Fiberglass Pressure Pipe, C-950. American Waterworks Association.
AWWA Standard for Asbestos-Cement Pressure Pipe, 4 Inch Through 16 Inch, for Water Distribution Systems, C-400, American Waterworks Association.
AWWA Standard for Selection of Asbestos-Cement Pressure Pipe, 4 Inch Through 16 Inch, for Water Distribution Systems, C-401, American Waterworks Association.
AWWA Standard for Asbestos-Cement Transmission Pipe, 18 Inch Through 42 Inch, for Potable Water and Other Liquids, C-402, American Waterworks Association.
AWWA Standard for Installation of Ductile-Iron Pipe and Their Appurtenances, C-600, American Waterworks Association.
AWWA Standard for Installation of Asbestos-Cement Pressure Pipe, C-603, American Waterworks Association.
AWWA Standard for Grooved and Shouldered Joints, C-606, American Waterworks Association.
AWWA Standard for Disinfecting Water Mains, C-651, American Waterworks Association.
Control of Communicable Diseases in Man, 15 edition, American Public Health Association, 1990.