Section 210. Formal requirements for the submission of engineering data

In accordance with Article 1 (§ 54.1-400 et seq.) of Chapter 4 of Title 54.1 of the Code of Virginia, all drawings, specifications, and engineer's reports submitted for approval shall be prepared by or under the supervision of a licensed professional engineer legally qualified to practice in Virginia. The front cover of each set of drawings, of each copy of the engineer's report, and of each copy of the specifications submitted for review shall bear the signed imprint of the seal of the licensed professional engineer who prepared or supervised the preparation and be signed with an original signature. In addition, each drawing submitted shall bear an imprint or a legible facsimile of such seal. All reports, plans, and specifications shall be submitted to the field office at least 60 days prior to the date upon which action by the division is desired. If the plans and specifications are found to be incomplete or inadequate for detailed review, the plans and specifications will be returned to the submitting party. If revisions to the plans or specifications are necessitated, a letter will be sent to the engineer who prepared them outlining the necessary revisions. Revised plans or specifications constitute a resubmittal; however, the division will make every effort to complete the review of such revisions promptly. Preliminary plans and the engineer's report should be submitted for review prior to preparation of final plans.

Historical Notes

Derived from VR355-18-003.16 § 1.22, eff. August 1, 1991; amended, Volume 09, Issue 17, eff. June 23, 1993.

Statutory Authority

§§ 32.1-12 and 32.1-170 of the Code of Virginia.