Section 120. Inlets and outlets

The inlets for recirculation shall be submerged and located to produce uniform circulation of water throughout the swimming pool without the existence of dead spots. Wall inlets should be located on not more than 20 foot centers entirely around the perimeter of the swimming pool. Bottom inlets shall be spaced, depending on the pool dimensions, so as to produce uniform water circulation. The number of bottom inlets shall be the same as required of wall inlets. Each inlet is to be designed as an adjustable orifice or provided with a valve.

An outlet drain shall be provided for completely emptying the swimming pool. Direct connection to a sanitary sewer shall not be permitted. Disposal of waste water to a storm sewer or natural watercourse shall be subject to approval of the State Health Commissioner. The outlet drain shall be covered with a grate of such design that it cannot be readily removed by, or produce any hazard to, the bathers.

Historical Notes

Derived from VR355-35-05 § 12, eff. March 1, 1962.

Statutory Authority

§ 35.1-13 of the Code of Virginia.